Solar Battery Status Console
Build a compact readout that helps you understand battery voltage trends and basic power monitoring without jumping into a full dashboard stack.
What you will learn
- • Turn it into a low-voltage warning system for remote solar boxes.
- • Add daily min/max memory so you can inspect overnight battery sag.
Components
3
Community Tips
0
Solar Battery Monitor with Arduino and LCD
CircuitSpark Lab • 15.9K views • Mar 18, 2026
Build Guide
Step-by-Step Instructions
Step 1
Measure safely before you display
Use a resistor divider so the Arduino sees a safe analog voltage even when the battery is fully charged.
This one habit protects both your board and the consistency of your measurements.
Step 2
Print readable live values
Display voltage on the first line and a simple health label on the second line so the console can be understood at a glance.
float voltage = analogRead(A0) * (5.0 / 1023.0) * 2.0;
lcd.setCursor(0, 0);
lcd.print("Battery: ");
lcd.print(voltage);
lcd.print("V");
Step 3
Add a practical threshold
Define a low-voltage threshold that suits your battery chemistry, then show a warning label when the reading dips below it.
That makes the build immediately useful instead of remaining just a measurement demo.
Community
💬 Questions & Tips from the Community
Sign in to join the discussion
You can still browse all comments, but posting requires an account.
Keep Building
What to Learn Next 🚀
Blink to Smart Signals
Start your first embedded program, understand the control loop, and build confidence with a clean first success.
Build a Weather Beacon
Read live climate data and show it beautifully on a compact OLED so your first IoT dashboard feels instantly useful.
Obstacle-Avoiding Bot
Combine motion, sensing, and directional scanning to build a small rover that can decide where to turn next.